38" Carbon Fiber 3.25" OD x .125" wall Drive Shaft with 1310 soid cross performance u joints.

ONE ONLY AT THIS PRICE

• 38 inch center to center on the u-joints
• Great for Open Motor Dirt Late Models
• Increased driver safety
• 3" ID x 3 1/4" OD x .125 wall Carbon Fiber Tubing
• 1310 solid cross performance u-joints ( 3 7/32" wide x 1 1/16" OD caps)
• Aluminum bonded yokes

35" Carbon Fiber 3.25" OD x .125" wall Drive Shaft with 1310 soid cross performance u joints.

TWO ONLY AT THIS PRICE

• 35 inch center to center on the u-joints
• Great for Open Motor Dirt Late Models
• Increased driver safety
• 3" ID x 3 1/4" OD x .125 wall Carbon Fiber Tubing
• 1310 solid cross performance u-joints ( 3 7/32" wide x 1 1/16" OD caps)
• Aluminum bonded yokes

Carbon Fiber 3.25" OD x .125" wall Drive Shaft with 1310 soid cross performance u joints.

• Great for Open Motor Dirt Late Models
• Increased driver safety
• specify length center to center on u joints
• 3" ID x 3 1/4" OD x .125 wall Carbon Fiber Tubing
• 1310 solid cross performance u-joints ( 3 7/32" wide x 1 1/16" OD caps)
• Aluminum bonded yokes

this superflex carbon fiber currently has no orange stripe as shown in pictures

30.5" CENTER TO CENTER ON THE U-JOINTS

2.25" OD Superflex Tubing with looser wind for dry slick track conditions.
Aluminum Bond Yokes machined for u-joint clearance.
Great for limited tire and crate engine modifieds!

this superflex carbon fiber currently has no orange stripe as shown in pictures

31.5" CENTER TO CENTER ON THE U-JOINTS

2.25" OD Superflex Tubing with looser wind for dry slick track conditions.
Aluminum Bond Yokes machined for u-joint clearance.
Great for limited tire and crate engine modifieds!

this superflex carbon fiber currently has no orange stripe as shown in pictures

32.0" CENTER TO CENTER ON THE U-JOINTS

2.25" OD Superflex Tubing with looser wind for dry slick track conditions.
Aluminum Bond Yokes machined for u-joint clearance.
Great for limited tire and crate engine modifieds!

Carbon Fiber 2.25" OD x .125" wall Drive Shaft with 1310 solid cross u joints

• Great for Dirt Modifieds
• Increased driver safety
• specify length center to center on u joints
• 2" ID x 2 1/4" OD x .125 wall Carbon Fiber Tubing
• 1310 solid cross performance u-joints ( 3 7/32" wide x 1 1/16" OD caps)
• Aluminum bonded yokes machined for u-joint clearance.

.Carbon Fiber 2.25" OD x .125" wall Drive Shaft with 8 inch Extra Clearance 1310 Slip Yoke

• Great for Dirt Modifieds
• Increased driver safety
• specify length center to center on u joints
• 2.0" ID x 2 1/4" OD x .125 wall Carbon Fiber Tubing
• 1310 solid cross performance u-joints ( 3 7/32" wide x 1 1/16" OD caps)
• REM ISF Polished 8 inch Extra Clearance Forged Slip Yoke Installed, Balanced Assembly
• Aluminum bonded yokes

Carbon Fiber 3.25" OD x .125" wall Drive Shaft with 8" Extra Clearance 1310 Slip Yoke

• Great for Open Motor Dirt Late Models
• Increased driver safety
• specify length center to center on u joints
• 3" ID x 3 1/4" OD x .125 wall Carbon Fiber Tubing
• 1310 solid cross performance u-joints ( 3 7/32" wide x 1 1/16" OD caps)
• REM ISF Polished 8" Extra Clearance Slip Yoke Installed, Balanced Assembly
• Aluminum bonded yokes

Carbon Fiber 2.75" OD x .125" wall Drive Shaft with 1310 U-Joints

• Great for Crate and Limited Motor Dirt Late Models
• Increased driver safety
• specify length center to center on u joints
• 2 1/2" ID x 2 3/4" OD x .125 wall Carbon Fiber Tubing
• 1310 solid cross performance u-joints ( 3 7/32" wide x 1 1/16" OD caps)
• Aluminum bonded yokes machined for u-joint clearance

Carbon Fiber 2.81" OD x .155" wall Drive Shaft with 1310 Performance Solid Cross U Joints

• Great for Open Motor Dirt Late Models with Clearance Needs
• smaller OD with stronger thicker carbon tubing.
• Increased driver safety
• specify length center to center on u joints
• 2 1/2" ID x 2 13/16" OD x .155 wall Carbon Fiber Tubing
• 1310 u-joints ( 3 7/32" wide x 1 1/16" OD caps)
• Aluminum bonded yokes

.Carbon Fiber 2.25" OD x .125" wall Drive Shaft with 9 inch Extra Clearance 1310 Slip Yoke

• Great for Dirt Modifieds
• Increased driver safety
• specify length center to center on u joints
• 2.0" ID x 2 1/4" OD x .125 wall Carbon Fiber Tubing
• 1310 solid cross performance u-joints ( 3 7/32" wide x 1 1/16" OD caps)
• REM ISF Polished 9 inch Extra Clearance Forged Slip Yoke Installed, Balanced Assembly
• Aluminum bonded yokes.

Carbon Fiber 2.75" OD x .125" wall Drive Shaft with 8" Extra Clearance 1310 Slip Yoke

• Great for Crate and Limited Motors in Dirt Late Models
• Increased driver safety
• specify length center to center on u joints
• 2 1/2" ID x 2 3/4" OD x .125 wall Carbon Fiber Tubing
• 1310 solid cross performance u-joints ( 3 7/32" wide x 1 1/16" OD caps)
• REM ISF Polished 8" Extra Clearance Slip Yoke Installed, Balanced Assembly
• Aluminum bonded yokes

Carbon Fiber 2.81" OD x .155" wall Drive Shaft with 8 inch Extra Clearance 1310 Slip Yoke

• Great for Open Motor Dirt Late Models with Clearance Needs
• smaller OD with stronger thicker carbon tubing.
• Increased driver safety
• specify length center to center on u joints
• 2 1/2" ID x 2 13/16" OD x .155 wall Carbon Fiber Tubing
• 1310 u-joints ( 3 7/32" wide x 1 1/16" OD caps)
• REM ISF Polished 8" Extra Clearance Slip Yoke Installed, Balanced Assembly
• Aluminum bonded yokes.

LONGER Carbon Fiber 2.81" OD x .155" wall Drive Shaft with 1310 Performance Solid Cross U Joints

• Increased driver safety
• specify length center to center on u joints
• 2 1/2" ID x 2 13/16" OD x .155 wall Carbon Fiber Tubing
• Solid cross 1310 u-joints ( 3 7/32" wide x 1 1/16" OD caps)
• Aluminum bonded yokes
• center to center sizes 39.5" up to 58.75" c to c
• order with a slip yoke for a balanced assembly

Drag Racing or Offroad Carbon Fiber Drive Shaft with solid cross 1350 u-joints

3.75" OD x .125" wall carbon fiber
1350 Solid Cross Performance u-joints. 3 5/8" wide with 1 3/16" OD caps.
27.5" thru 39" center to center measurements available
Choose and order a transmission slip yoke and we will balance the assembly

Drag Racing or Offroad Carbon Fiber Drive Shaft with solid cross 1350 u-joints.

Longer version

3.75" OD x .125" wall carbon fiber
1350 Solid Cross Performance u-joints. 3 5/8" wide with 1 3/16" OD caps.
39.5" and up center to center measurements available
Choose and order a transmission slip yoke and we will balance the assembly

TRANSMISSION SLIP YOKE IN BLACK FORGED SHOWN IN PCTURES BUT NOT INCLUDED IN THIS PURCHASE.